Product
Oak Pointe 2.0 – Dark Chocolate | 25288
Width: 2 1/4"
Thickness: 3/4"
The Oak Pointe® 2.0 collection captures the warm beauty and rich grain of Oak, with its unique color variations, mineral streaks and small knots. Crafted from solid Appalachian Oak, Oak Pointe® 2.0 is offered in timeless, warm colors and traditional, narrow widths. The collection is protected by an aluminum oxide finish and backed by a 25-year finish warranty.
Color: Dark Chocolate
Finish Warranty
| Collection | Oak Pointe 2.0™ |
|---|---|
| Construction | Solid Oak Hardwood |
| Species | Oak |
| Color | Dark Chocolate |
| Texture | Smooth |
| Finish | Aluminum Oxide Finish |
| Edge | Beveled Edge / Square End |
| Janka Rating | 1290 |
| Origin | USA |
| Width | 2 1/4" |
| Length | Random board lengths up to seven feet |
| Thickness | 3/4" |
| Finish Warranty | 25-year warranty |
Skill Level
Level Three
Installation experience
We always recommend professional installation. If you're planning to install these floors yourself, be sure to thoroughly review your installation instructions. Find a professional installer in your area by visiting the National Wood Flooring Association.
Where to install this floor
At or above grade
Solid hardwood floors are only appropriate to install in locations that are at-grade or above-grade.How to install this floor
Nail-down
Nail-down installation is a method commonly used for solid hardwood floors and follows the same method as staple-down installation, but you use a nail rather than a staple.
Staple-down
Staple-down installation is utilized for prefinished, engineered hardwood flooring using a narrow-crown stapler to fasten your flooring to wood subfloors.Floor trims & molding
Quarter round
Quarter round molding is used to cover the expansion space near a wall. Quarter round may also be used with a new or existing base molding.
Reducer strip
A reducer strip is used as a transition from one flooring to another of a different height.
Stair nose
Stair nose molding is used as a transition on stair steps and sunken dens.
T-Molding
T–Molding is used as a transition between two hard surface floors of equal height. A t-mold may be used to bridge wood floor and ceramic tile.
Threshold
Threshold molding is used at raised hearths and exterior doors. A threshold is also used as a transition from wood to carpet.Alternate Options
-
MuirfieldSolid Hickory HardwoodSaddleWidth: 3"Thickness: 3/4"Made in USASKU 14747
-
MuirfieldSolid Maple HardwoodAutumnWidth: 4"Thickness: 3/4"Made in USASKU 14595
-
MuirfieldSolid Maple HardwoodCappuccinoWidth: 3"Thickness: 3/4"Made in USASKU 14730
-
St. AndrewsSolid Oak HardwoodStirrupWidth: 3"Thickness: 3/4"Made in USASKU 14703
423-283-4695
