Product
Wexford – Espresso | 23552
Width: 4"
Thickness: 3/4"
The Wexford Collection is a 3/4-inch-thick solid product that is available in white oak. Manufactured in the United States and offered in random lengths up to 7 feet, Wexford offers a classic hardwood flooring look that has been enriched with a wire-brushed surface texture. Available in a 4-inch and 5-inch width and eight colors, the Wexford Collection is protected by a lifetime warranty.
Color: Espresso
Finish Warranty
| Collection | Wexford™ |
|---|---|
| Construction | Solid White Oak Hardwood |
| Species | White Oak |
| Color | Espresso |
| Texture | Wirebrushed |
| Finish | PPG Ultra Low Gloss Finish |
| Edge | Beveled edge / beveled end |
| Janka Rating | 1360 |
| Origin | USA |
| Width | 4" |
| Length | Random lengths up to six and a half feet |
| Thickness | 3/4" |
| Finish Warranty | Lifetime finish warranty |
Skill Level
Level Three
Installation experience
We always recommend professional installation. If you're planning to install these floors yourself, be sure to thoroughly review your installation instructions. Find a professional installer in your area by visiting the National Wood Flooring Association.
Where to install this floor
At or above grade
Solid hardwood floors are only appropriate to install in locations that are at-grade or above-grade.How to install this floor
Nail-down
Nail-down installation is a method commonly used for solid hardwood floors and follows the same method as staple-down installation, but you use a nail rather than a staple.
Staple-down
Staple-down installation is utilized for prefinished, engineered hardwood flooring using a narrow-crown stapler to fasten your flooring to wood subfloors.Floor trims & molding
Quarter round
Quarter round molding is used to cover the expansion space near a wall. Quarter round may also be used with a new or existing base molding.
Reducer strip
A reducer strip is used as a transition from one flooring to another of a different height.
Stair nose
Stair nose molding is used as a transition on stair steps and sunken dens.
T-Molding
T–Molding is used as a transition between two hard surface floors of equal height. A t-mold may be used to bridge wood floor and ceramic tile.
Threshold
Threshold molding is used at raised hearths and exterior doors. A threshold is also used as a transition from wood to carpet.Alternate Options
-
St. AndrewsSolid Oak HardwoodSaddleWidth: 3"Thickness: 3/4"Made in USASKU 14714
-
MuirfieldSolid Maple HardwoodCappuccinoWidth: 3"Thickness: 3/4"Made in USASKU 14730
-
St. AndrewsSolid Oak HardwoodStirrupWidth: 3"Thickness: 3/4"Made in USASKU 14703
-
ChatelaineSolid Maple HardwoodAutumnWidth: 4"Thickness: 3/4"Made in USASKU 10689
423-283-4695
