Product
Oak Pointe 2.0 LG – Natural | 26201
Width: 3"
Thickness: 3/4"

The Oak Pointe® 2.0 Low-Gloss collection captures the warm beauty and rich grain of Oak, with its unique color variations, mineral streaks and small knots. Crafted from solid Appalachian Oak, Oak Pointe® 2.0 LG is offered in timeless, warm colors and traditional, narrow widths. The collection is protected by an aluminum oxide finish and backed by a 25-year finish warranty.
Discontinued – Limited Availability
Contact us at 423-283-4695 to check availability of remaining inventory.
Color: Natural
Collection | Oak Pointe 2.0 LG™ | Discontinued – Limited Availability |
---|---|
Construction | Solid Red Oak Hardwood |
Species | Red Oak |
Color | Natural |
Texture | Smooth |
Finish | Aluminum Oxide Finish |
Edge | Beveled edge / square end |
Janka Rating | 1290 |
Origin | USA |
Width | 3" |
Length | Random board lengths up to seven feet |
Thickness | 3/4" |
Finish Warranty | 25-year warranty |
Skill Level

Level Three
Installation experience
We always recommend professional installation. If you're planning to install these floors yourself, be sure to thoroughly review your installation instructions. Find a professional installer in your area by visiting the National Wood Flooring Association.
Where to install this floor

At or above grade
Solid hardwood floors are only appropriate to install in locations that are at-grade or above-grade.How to install this floor

Staple-down
Staple-down installation is utilized for prefinished, engineered hardwood flooring using a narrow-crown stapler to fasten your flooring to wood subfloors.Floor trims & molding

Quarter round
Quarter round molding is used to cover the expansion space near a wall. Quarter round may also be used with a new or existing base molding.
Reducer strip
A reducer strip is used as a transition from one flooring to another of a different height.
Stair nose
Stair nose molding is used as a transition on stair steps and sunken dens.
T-Molding
T–Molding is used as a transition between two hard surface floors of equal height. A t-mold may be used to bridge wood floor and ceramic tile.